Sub Zero Repair in San Diego (619) 821-2103

Sub Zero Repair in San Diego

Sub Zero Repair Sub-Zero is the most trusted brand when you are shopping for new appliances. Sub Zero repair is not that common because these refrigerators are among the best built. Today’s Sub-Zero appliances utilize the newest technology to give your appliances more capabilities than ever before. With new digital control systems and advanced features for temperature control and time settings, you will never be disappointed after investing in Sub-Zero appliances.

With frequent use, your Sub-Zero refrigerators may occasionally require minor repairs. This is just part of the typical wear and tear that goes along with home appliances. So where should you turn when your Sub-Zero fridge, freezer, or stove stops working? Residents in San Diego turn to San Diego Appliance Repair for all of their Sub-Zero appliance repair needs.

We provide complete service for all Sub-Zero appliances in any make and model. From the most basic refrigerator to complicated wine preservation units, our trained technicians have the education and experience to fix them all. Each of our technicians is trained specifically in the latest technology to repair Sub-Zero appliances. While Sub-Zero utilizes a unique design in all appliances, the San Diego service team is prepared to help with any Sub-Zero issue that might arise in your home.

We regularly provide Sub Zero repair for the following appliances:

  • PRO 48 Refrigeration
  • Built-in Refrigerators
  • Integrated Refrigerators
  • Under Counter Refrigerators
  • Wine Preservation
  • Freezers
  • Ice makers

Even if the warranty on your Sub-Zero refrigerator has expired, our affordable prices will make the repair job possible. We only use parts that are approved by Sub-Zero for these specific appliances.  Because our technicians have attended factory certification courses specifically for Sub-Zero, you can have peace of mind that your appliances are in good hands.

We also understand that sometimes appliance repair is an emergency and it simply cannot wait. If you are counting on your wine chiller to keep the wine cold and ready for an upcoming party, you can’t afford to wait days to have your Sub-Zero wine preservation unit repaired. For your convenience, we offer same day appliance repair at no additional charge for these urgent situations.

When you notice a problem with your Sub-Zero appliances, simply place a call to our friendly customer support department. We have live representatives available to take your calls 24 hours a day, 7 days a week. We even have someone by the phone on major holidays in case you experience an appliance repair emergency. When you call, be sure to explain in detail how your Sub-Zero appliance is malfunctioning. The customer support team will dispatch a repair technician to come to your home right away and begin making repairs.

Sub-Zero appliances are undoubtedly an investment. These expensive appliances are more than just a staple in your home. They are also a work of art with exquisite design and the ultimate innovation in today’s technology. Protect this investment by choosing the most trusted Sub-Zero repair company in San Diego. Give us a call today to schedule your repair appointment.

Residential and Commercial Sub Zero Repair in San Diego

We know that appliance problems happen to everyone, which is why we work hard to make sure everyone has access to our San Diego Sub Zero repair. It doesn’t matter if you’re a San Diego resident, the owner or manager of a business, or the manager of a property, you can contact us about our appliance repair services and rest assured that we will take care of you. We work quickly and make sure that the appliance has been properly repaired. You’ll barely notice that were there. Once we leave, you’ll be thrilled with how well your Sub Zero appliance work.

We have been in business for a very long time, and our years of experience mean that we have knowledge and resources that newer appliance repair companies simply don’t have access to. No matter how large or small your Sub Zero appliance repair in San Diego needs might be, we will use all of the tool at our disposal to resolve the matter in a timely fashion. There’s no such thing as a Sub Zero repair that’s too complicated for us. We have seen and repaired it all!

The Best Sub Zero Appliance Repair in the City of San Diego

When it comes to Sub Zero repair in San Diego you simply aren’t going to find any business that does a better job than we do. We have been serving the San Diego community since 1991, and the key to our longevity is the high quality nature of our repair work as well as our excellent customer service. Every single technician in our employ is strict about honoring industry standards and doesn’t consider the job complete until you’re thrilled with the way your Sub Zero appliances are functioning. By contacting us about our Sub Zero appliance repair service in San Diego, you’ll find that not only can repairing your faulty appliances be a stress free process, but it is almost always turns out to be a great deal more economical than purchasing brand new appliances.

With us by your side, you can reasonably expect to get years’ more use out of your current Sub Zero appliances!

Below are some of the most common Sub Zero Refrigerator error codes:

Sub Zero Wine Storage Units 400 Series – Possible error indicators

NOTE: Temperatures shown are for reference only, actual temperatures may vary.

Temp 55 + SERVICE (Flashing) Error Code EE————————Upper compartment thermistor fault

BELL ON (Flashing)
Temp 55 + SERVICE (Flashing) Error Code EE————————-Upper compartment thermistor fault with temperature alarm

Temp EE + SERVICE (Flashing) Error Code 55 ————————Lower compartment thermistor fault

BELL ON (Flashing)
Temp EE + SERVICE (Flashing) 55————————-Lower compartment thermistor fault with temperature alarm

Temp 55 + SERVICE (Flashing) 55————————-Either evaporator thermistor fault

BELL ON (Flashing)
Temp 55 SERVICE (Flashing) 55————————-Either evaporator thermistor fault with temperature alarm

NOTE: Cooling functions are disabled when error indicators appear.

Sub Zero Refrigerator MODEL 427R 400 SERIES – Possible Error Indicators

NOTE: Temperature shown is for reference only, actual temperature may vary.
TOP DRAWER (Flashing)
Temp EE + LOWER DRAWER (Flashing) ———————————————-Refrigerator compartment thermistor fault
TOP DRAWER (Flashing)
Temp 40 + LOWER DRAWER (Flashing) ————————————————Refrigerator evaporator thermistor fault.
Temp E0
700BR & 700BF Communication Error between ————————————–Control Board & Control Panel
Temp E3
700BR & 700BF Communication Error between ————————————-Control Board & Control Panel

Sub Zero 400-2 SERIES WINE STORAGE – Possible Error Indicators

NOTE: Temperatures shown are for reference only, actual temperatures may vary.
Temp 55 + SERVICE (Flashing) EE —————————————————————Upper compartment thermistor fault
BELL ON (Flashing)
Temp 55 + SERVICE (Flashing) EE ————————–Upper compartment thermistor fault with temperature alarm
Temp EE + SERVICE (Flashing) 55 —————————————————————Lower compartment thermistor fault
BELL ON (Flashing)
Temp EE + SERVICE (Flashing) 55 —————————-Lower compartment thermistor fault with temperature alarm
Temp 55 + SERVICE (Flashing) 55 ——————————————————————–Either evaporator thermistor fault
BELL ON (Flashing)
Temp 55 + SERVICE (Flashing) 55 ———————————Either evaporator thermistor fault with temperature alarm
NOTE: Cooling functions are disabled when error indicators appear.

Sub Zero 400-2 SERIES WINE STORAGE

CODE INDICATION
05 Upper Cabinet Thermistor read open / short for 10+ seconds, or repeatedly erratic tempís.
06 Upper Evap. Thermistor read open / short for 10+ seconds, or repeatedly erratic tempís.
07 Lower Cabinet Thermistor read open / short for 10+ seconds, or repeatedly erratic tempís.
08 Lower Evap. Thermistor read open / short for 10+ seconds, or repeatedly erratic tempís.
10 Upper Cabinet Warm Temperature alarm
11 Upper Cabinet Cold Temperature alarm
12 Lower Cabinet Warm Temperature alarm
13 Lower Cabinet Cold Temperature alarm
15 Sealed System Fault (evap temp. cannot drop 5∞ in 5 minutes, 3 consecutive valve activations)

Sub Zero 400-2 SERIES – 427R-2 REFRIGERATOR CODE INDICATION

05 Upper Cabinet Thermistor read open / short for 10+ seconds, or repeatedly erratic tempís.
50 Excessive Refrigerator compressor run

Sub Zero 600 SERIES (Prior To Serial #1810000)

Possible Error Indicators
NOTE: Temperatures shown are for reference only, actual temperatures may vary.
Temp EE + SERVICE (Flashing) Code 38 ————————————————————–Freezer compartment thermistor Fault
Temp 00 + SERVICE (Flashing) Code EE ——————————————————–Refrigerator compartment thermistor fault
Temp 00 + SERVICE (Flashing) Code 38 ————————————————————–Refrigerator evaporator thermistor fault
SERVICE (Flashing)
Temp 00 ICE (Flashing) Code 38 —————–Water valve energized longer than 15 seconds. Icemaker system disabled.
NOTE: A 45 minute dwell follows each IM cycles (no power to Icemaker). To bypass 45 minute dwell, Switch unit OFF then back ON.
SERVICE (Flashing)
12 VACUUM (Flashing) Code 45————————————-CONDENSER:Several excessive compressor run periods

Sub Zero 600 SERIES (Starting With Serial #1810000)

Possible Error Indicators
NOTE: Temperatures shown are for reference only, actual temperatures may vary.
Temp EE + SERVICE (Flashing) Code 38 —————————————————————–Freezer compartment thermistor fault
Temp 00 + SERVICE (Flashing) Code EE ———————————————————Refrigerator compartment thermistor fault
Temp 00 + SERVICE (Flashing) Code 38 ————————————————–Several excessive compressor run periods OR—————————————————-Refrigerator evaporator thermistor fault
SERVICE (Flashing)
Temp 00 ICE (Flashing) Code 38 —————Water valve energized longer than 15 seconds. Icemaker system disabled.
NOTE: A 45 minute dwell follows each IM cycles (no power to Icemaker). To bypass 45 minute dwell, Switch unit OFF then back ON.
CODE INDICATION
05 Refrig. Cabinet Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic tempís
06 Refrig. Evaporator Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic tempís
07 Freezer Cabinet Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic tempís
08 Freezer Evaporator Thermistor read open or shorted for 10+ seconds, or repeatedly read erratic tempís
20 Defrost Underheat with No Voltage Feedback Through Gray/White Wire at Defrost Start
21 Defrost Overheat
22 No Voltage Feedback Through Gray/White Wire at Defrost Start
23 Defrost Overheat with No Voltage Feedback through Gray/White Wire at Defrost Start
24 Defrost Underheat

Sub Zero 600-2 SERIES

Possible Error Indicators
NOTE: Temperatures shown are for reference only, actual temperatures may vary.
Temp EE SERVICE (Flashing) Code 38 —————————————————————Freezer compartment thermistor fault
Temp 00 SERVICE (Flashing) Code EE ———————————————————-Refrigerator compartment thermistor fault
Temp 00 SERVICE (Flashing) Code 38 ————————————————-Several excessive compressor run periods OR———————————————————Refrigerator evaporator thermistor fault
SERVICE (Flashing)
Temp 00 ICE (Flashing) Code 38 ——————————-Water valve energized longer than 15 seconds, five consecutive——————————————–times. Icemaker system disabled 24 hours each time.
NOTE: A 45 minute dwell follows each IM cycles (no power to Icemaker). To bypass 45 minute dwell, Switch ice maker system OFF then back ON.
Temp 00 SERVICE (Steady, not Flashing)Code 38 ————————–Error Codes logged and observed but not cleared.
CODE INDICATION
05 Ref. cabinet therm. read open, short or erratic temp for 10+ secís
06 Ref. evap. therm. read open, short or erratic temp for 10+ secís
07 Fre. cabinet therm. read open, short or erratic temp for 10+ secís
08 Fre. evap. therm. read open, short or erratic temp for 10+ secís
20 Defrost underheat & no feedback thru Gr/Wh wire at defrst start
21 Defrost overheat
22 No feedback thru Gr/Wh wire at defrost start
23 Defrost overheat & no feedback thru Gr/Wh wire at defrost start
24 Defrost underheat
30 Excess IM Water Valve Solenoid Activation (> 15 Seconds)
40 Excessive Freezer Comp Run
50 Excessive Refrigerator Comp Run

Sub Zero 700 SERIES

Possible Error Indicators
(- -) —————————————————————————- Control is shut off. Press COLDER key to start unit.
(- 20 ) ——————————————— Zone/Compartment thermistor fault. Repair wiring or replace thermistor.
( 55) —————————————– Zone/Compartment thermistor shorted. Repair wiring or replace thermistor.
(Su) —————————————————————Blue wire of display cable unhooked or faulty. Repair wiring.
(- 88 ) ———- Red Wire of display cable unhooked or faulty, top lights are off and keys are inoperative.

Sub Zero 700-2 SERIES (Tall Units)

Possible Error Indicators
NOTE: Temperatures shown are for reference only, actual temperatures may vary.
EE SERVICE (Flashing) 38 ————————————————————–Freezer compartment thermistor Fault
00 SERVICE (Flashing) EE ——————————————————–Refrigerator compartment thermistor fault
00 SERVICE (Flashing) 38 —————————————————Several excessive compressor run periods OR———————————————————–Refrigerator evaporator thermistor fault
SERVICE (Flashing)
00 ICE (Flashing) 38 ————–Water valve energized longer than 15 seconds. Ice maker system disabled.
NOTE: A 45 minute dwell follows each IM cycles (no power to Icemaker). To bypass 45 minute dwell, Switch unit OFF then back ON.

Sub Zero 700-2 SERIES (Tall Units)Starting W/ Serial #1756193

CODE INDICATION
05 Ref. cabinet therm. read open, short or erratic temp for 10+ secís
06 Ref. evap. therm. read open, short or erratic temp for 10+ secís
07 Fre. cabinet therm. read open, short or erratic temp for 10+ secís
08 Fre. evap. therm. read open, short or erratic temp for 10+ secís
20 Defrost underheat & no feedback thru Gr/Wh wire at defrst start
21 Defrost overheat
22 No feedback thru Gr/Wh wire at defrost start
23 Defrost overheat & no feedback thru Gr/Wh wire at defrost start
24 Defrost underheat
80 High VS compressor differential pressures or low voltage supplied to VS compressor
81 High Amperage Draw at VS compressor
82 VS comp. couldnít maintain min. speed at highest current draw
83 Locked VS compressor Rotor
84 Short circuit at VS compressor controller output circuit
85 VS compressor inverter overheated & shut down VS compressor
86 Serial communication failure between VS compressor controller and electronic control board
87 Speed information from electronic control board is out of spec.
88 Electronic control board not receiving status data in response to speed commands
NOTE: VS Compressor = Variable Speed Compressor

Sub Zero 700-3 SERIES – TALL UNITS

CODE INDICATION
05 Ref. cabinet therm. read open, short or erratic temp for 10+ secís
06 Ref. evap. therm. read open, short or erratic temp for 10+ secís
07 Fre. cabinet therm. read open, short or erratic temp for 10+ secís
08 Fre. evap. therm. read open, short or erratic temp for 10+ secís
20 Defrost underheat & no feedback thru Gr/Wh wire at defrst start
21 Defrost overheat
22 No feedback thru Gr/Wh wire at defrost start
23 Defrost overheat & no feedback thru Gr/Wh wire at defrost start
24 Defrost underheat
30 Excess IM Water Valve Solenoid Activation (> 15 Seconds)
40 Excessive Freezer Comp Run
50 Excessive Refrigerator Comp Run

Sub Zero 700-3 SERIES – BASE UNITS

CODE INDICATION
05 Ref. cabinet therm. read open, short or erratic temp for 10+ secís
06 Ref. evap. therm. read open, short or erratic temp for 10+ secís
07 Fre. cabinet therm. read open, short or erratic temp for 10+ secís
08 Fre. evap. therm. read open, short or erratic temp for 10+ secís
20 Defrost underheat & no feedback thru Gr/Wh wire at defrst start
21 Defrost overheat
22 No feedback thru Gr/Wh wire at defrost start
23 Defrost overheat & no feedback thru Gr/Wh wire at defrost start
24 Defrost underheat
30 NA
40 Excessive Freezer Comp Run
50 Excessive Refrigerator Comp Run


5 out of 5 stars Ratings

Read what customers have to say about San Diego Appliance Repair

Reviewer: Julia Miller –

San Diego Appliance is such a pleasure to work with. They really take care of their customers. The technician has come out and worked on both my gas stove and my dishwasher and I was very pleased with the completed work both times! Overall I was very pleased with the experience and would not hesitate to call again or recommend them to others.